Introduction:
Deciding to re-roof your 3 bedroom flat is a big undertaking, and one of the main factors you’ll need to consider is the amount of wood you’ll need for the job. It’s important to get the calculations right, as having too much or too little wood can cause serious problems. In this article, we’ll not only look at the type of wood you’ll need, but also how much you’ll need to complete the job.
Wood Types:
The most important factor to consider when selecting wood for a roof is the type of wood you’ll need. Different types of wood have different characteristics which make them better or worse for different types of roofs. For example, cedar is a popular choice for roofing because it’s light, strong and weather-resistant. On the other hand, pine is cheaper and more abundant, but isn’t as strong or durable as cedar. Ultimately, the choice is yours as to which type of wood you’ll use.
Calculating The Wooden Area:
The next step is to calculate the wooden area of your roof. To do this, you’ll need to know the length and width of the roof, and the pitch of the roof. The pitch refers to the angle of the roof, and can be measured with a simple carpenter’s level. Once you have these measurements, you can use a roofing calculator to determine the wooden area of your roof.
Quantity of Wood:
Once you’ve determined the wooden area of your roof, you can calculate the quantity of wood you’ll need. Generally speaking, you’ll need one board for every five feet of roof. This means that if your roof is 30 feet long, you’ll need six boards. Additionally, you’ll need to factor in wastage, as some of the wood will be lost to cutting, fitting, etc. It’s recommended to buy an extra 10% of wood, in case you need it.
Buying The Wood:
Once you know the quantity of wood you’ll need, you can begin the process of buying it. You’ll need to buy the wood in a specific size, as the boards need to be long enough to cover the length of your roof. Generally, you should buy boards that are at least 20-30% longer than your roof.
Fitting The Wood:
Once you’ve bought the wood, you can begin fitting it to the roof. You should start from the bottom of the roof and work your way up, as this will ensure that the boards fit together properly. It’s important to use a spirit level to make sure that the boards are fitted correctly.
Securing The Wood:
Once the wood is fitted, it needs to be secured to the roof. You’ll need to use nails or screws to do this, depending on the type of wood you’re using. Make sure to use nails or screws that are long enough to penetrate the wood, but not so long that they break through the roof. Additionally, you’ll need to use a sealant to ensure that the wood is properly sealed against the elements.
Conclusion:
Re-roofing your 3 bedroom flat is a big job, and one of the most important factors is knowing how much wood you’ll need. The amount of wood you’ll need will depend on the type of wood you’re using, the wooden area of your roof, and the amount of wastage you’ll need to factor in. Once you’ve got the wood, you can begin fitting it to the roof and securing it with nails or screws. Following these steps will ensure that your roof is properly fitted and secured.
No comments:
Post a Comment